
Deze aanbieding is helaas verlopen op 7 juli 2022.
Over deze aanbieding
Deze aanbieding is verlopen. Hier zijn wat interessante opties voor je:
Laagste prijs elders €150,87
The Xiaomi AX3000 router uses a new generation of Wi-Fi 6 technology, with simultaneous dual-band wireless speed of up to 2976Mbps, which is 155% higher than the conventional AX1800, and the Internet speed is faster.

In addition, the Xiaomi AX3000 router is equipped with OFDMA technology, which divides the wireless channel into multiple sub-channels (sub-carriers) to form a radio frequency resource unit. User data is carried on each resource unit rather than occupying the entire channel. Multiple users in the segment transmit in parallel at the same time without queuing and competing with each other, improving efficiency and reducing waiting time in the queue.

It is worth mentioning that the 5G frequency band of this router supports 2x2 160 MHz, which is twice as wide as the traditional 80 MHz bandwidth, and the theoretical speed is also doubled. The connection of multiple devices also has a smooth network speed.

In terms of performance, Xiaomi AX3000 is equipped with a new generation of Qualcomm chips, specifically IPQ5000, equipped with 4 hidden antennas, 4 independent signal amplifiers, the 2.4 GHz and 5 GHz frequency bands are equipped with signal amplifiers. independent (PA + LNA), the signal intensity is increased by 4 dB, and the theoretical coverage strength increases by 50%.
It also supports Xiaomi Mesh technology, which allows multiple routers to form a mesh network. Whether it's a large apartment or multiple floors, you can cover your entire house with a super network signal. The equipment can be seamlessly plugged into multiple routers and you can play on the go without fear of lag.
In terms of appearance design, Xiaomi AX3000 router adopts vertical solution and cool black cube design. It has good heat conduction and heat dissipation, large channel convection, and large heat sinks to effectively reduce the chip temperature and keep the system in a stable operating state at all times.
The Xiaomi AX3000 router uses a new generation of Wi-Fi 6 technology, with simultaneous dual-band wireless speed of up to 2976Mbps, which is 155% higher than the conventional AX1800, and the Internet speed is faster.

In addition, the Xiaomi AX3000 router is equipped with OFDMA technology, which divides the wireless channel into multiple sub-channels (sub-carriers) to form a radio frequency resource unit. User data is carried on each resource unit rather than occupying the entire channel. Multiple users in the segment transmit in parallel at the same time without queuing and competing with each other, improving efficiency and reducing waiting time in the queue.

It is worth mentioning that the 5G frequency band of this router supports 2x2 160 MHz, which is twice as wide as the traditional 80 MHz bandwidth, and the theoretical speed is also doubled. The connection of multiple devices also has a smooth network speed.

In terms of performance, Xiaomi AX3000 is equipped with a new generation of Qualcomm chips, specifically IPQ5000, equipped with 4 hidden antennas, 4 independent signal amplifiers, the 2.4 GHz and 5 GHz frequency bands are equipped with signal amplifiers. independent (PA + LNA), the signal intensity is increased by 4 dB, and the theoretical coverage strength increases by 50%.
It also supports Xiaomi Mesh technology, which allows multiple routers to form a mesh network. Whether it's a large apartment or multiple floors, you can cover your entire house with a super network signal. The equipment can be seamlessly plugged into multiple routers and you can play on the go without fear of lag.
In terms of appearance design, Xiaomi AX3000 router adopts vertical solution and cool black cube design. It has good heat conduction and heat dissipation, large channel convection, and large heat sinks to effectively reduce the chip temperature and keep the system in a stable operating state at all times.

Community Updates
32 Reacties
gesorteerd opAbsoluut niet. Je kan je mesh setje prima bedraad met elkaar verbinden, het enige verschil is dat de backbone dan bedraad ipv draadloos werkt en daarmee meer bandbreedte overhoudt voor je daadwerkelijke apparaten.
De meeste tri-band devices houden een wireless band voor de backbone zonder daar andere apparaten op toe te staan. Als bekabeling geen optie is dan is dat je beste optie.
Goed spul om je in in te lezen als je het eens wilt vervangen, zeker als je denkt dat mesh enkel draadloos kan zijn
Roaming is dat het device (je telefoon bijvoorbeeld) dit zelf regelt. En dat werkt vaak problematisch.
"Het roaminggedrag wordt noch door de router, noch door de repeater beïnvloed. Het draadloze netwerkapparaat neemt zelfstandig de beslissing om over te schakelen naar een ander Wi-Fi-netwerk zodra de het ontvang- en zendvermogen onder een door de fabrikant aangegeven grens komt."
Veel mesh-systemen communiceren onderling zodat, wanneer een device te weinig signaal heeft en een betere verbinding heeft, het acces point hem eraf gooit en dat de ander het overneemt, want beter bereik. Dus met wired heeft het zeker nog zin om een mesh systeem te nemen ipv 2 access points met dezelfde netwerknaam.
Niet allemaal trouwens... Verschilt wel per device. Voor ubiquity heeft dit "zero handoff". Je device ziet dan maar 1 AP. IPV 3 met allemaal hetzelfde netwerkadres. En de AP's bepalen dan zelf waar het device naar schakelt ipv dat het device dit regelt. (aangepast)
Marketplace met 1 review...
Die doen niet mee zo wordt je opgelicht
Bedoel je bedrijf PBC noemen klinkt technisch, staat het voor peanut butter cheese
Bekabeld mesh bestaat niet. Mesh is per definitie draadloos.
Onzin. Hier mesh van ASUS draaien met bekabelde backhaul.
Bedankt! Dat houdt me weer even scherp. Inderdaad niet te vertrouwen.
Mesh is toch meer dan enkel draadloos?. Ook goede handoff zodat de mesh de verbindingen beter verdelen? En zodat devices niet verbonden blijven met slechts 1 streepje.
Arme Belgen
Geen 4g op mijn tablet, maar ik snap je punt. In mijn woning bepaal ik de beveiliging, dus daar komt die rommel niet binnen. Ik ben ietwat paranoide dus ik beheer ook mijn eigen externe servers waar mail, storage, dns, webservers, etc op draaien. Voordeel daarbij is dat ik weet hoe het werkt, maar ook dat ik alleen mijzelf de schuld kan geven als het kapot gaat. Gmail, etc komt er hier ook niet in.
De Belgische veiligheidsdienst heeft onlangs al hun oude apparatuur vervangen voor Huawei routers
Is dit het begin van een Belgen mop?
Xiaomi Mesh System AX3000 WLAN 6 (2 stuks) amazon.nl/dp/…9PX
Ik heb ze niet kunnen vinden bij Xiaomi zelf. Heb je een link?
bol.com/nl/…49/
keurmerk.info/nl/…236
als het hetzelfde bedrijf is dan is de kans groot dat het wel goed zit. het is alleen niet meer verkrijgbaar.
altijd oppassen met dit soort verkopers, laat anderen maar eerst het risico nemen
De naam van het product veranderd niet. Je gebruikt alleen de mesh functie niet (aangepast)
Dat is roaming
Deels waar, roaming is altijd een "client decision". Het hoeft helemaal niet problematisch te zijn.
Je kunt wel vanuit een ap (ook mesh set) centraal regelen dat er meer informatie m.b.t. netwerk condities naar een client gestuurd kan worden waarmee deze zelf dan de juiste beslissing kan nemen.
Dit wordt geimplementeerd op basis van 802.11K, K en R. Dit moet wel ondersteund worden door het AP en de debetreffende clients. De meeste moderne apparatuur ondersteund minimaal wel van deze 3 standaardeb. Meestal wordt dit gewoon netjes vermeld in de specificaties van de gebruikte apparatuur.
Zero Handoff van Ubiquity is trouwens een ouderwetse manier van roaming forceren voor oude type clients die geen roaming standaardern ondersteunen. Het kan werken maar heeft meer nadelen dan voordelen. (aangepast)
Zijn natuurlijk hele mooie cijfers! Heb 200Mbit glasvezel via een Fritzbox 7590 met 2 Fritz 3000 mesh repeaters. Haal met wifi rond de 300Mbit. Zal je in de praktijk het verschil merken?